Table of Contents
Advertisement
Rear Panel Highlights
TABLE 3
Connector/Indicator
12V 2A outputs
Networked AV Card Slots
AUDIO INPUTS/OUTPUTS
VIDEO INPUTS (1-6)
VIDEO OUTPUTS
6-port Gbps Switch
N7142 User Manual
Description
12 Volt DC power output. Can be used to power the Networked AV Cards (if PoE is not being used).
Dependent on model type.
NMX-PRS-N7142: Slots can be populated with Encoder and Decoder cards as required by the application.
NMX-PRS-N7142-23: Slots are pre-populated with one N2312 Encoder card and one N2322 Decoder card.
Extensive audio selections are supported including a built-in DSP and 60W stereo amplifier capable of
operating in 4Ω/8Ω, 70V, or 100V modes. In addition to audio from the HDMI inputs, the unit has six
independent balanced stereo inputs and two independent microphone inputs with phantom power.
Four 4K60 HDMI inputs and two VGA inputs. These can be independently switched between the two
independently scaled HDMI outputs using the VIDEO SELECT buttons on the front panel.
Two 4K60 HDMI outputs, each with its own mirrored HDMI port. This allows the output to be sent to an
Encoder card, a second display, or other video distribution equipment.
• Channels 1A and 1B are a mirrored pair.
• Channels 2A and 2B are a mirrored pair.
Six-port Gbps switch (with PoE+ on the left three ports). Used for interconnection of AV cards and the
main network.
Introducing Your New N7142 Room Switcher
8
Advertisement
Table of Contents
