Electrical Installation
Example 3
Encoder connected to X55 for positioning loop. Since the
encoder is not mounted directly on the motor shaft, a 2nd
encoder connection (X56) is needed for running closed FC
speed control loop.
MOTOR
Illustration 4.14 Encoders Mounted on the Motor and the Gear
Box
MG33R302
Operating Instructions
Example 4
Resolver feedback used. MCB 103 option is needed. FC
speed control loop must be closed.
Illustration 4.15 Resolver Mounted on the Motor
Danfoss A/S © 04/2014 All rights reserved.
MCB 103
MOTOR
4
4
19