Sata Configuration; Intel Rapid Start Technology - Nexcom NEX 885 User Manual

Chapter 3: BIOS Setup

SATA Configuration

This section is used to configure the SATA drives.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
SATA Controller(s) [Enabled]
SATA Mode Selection [IDE]
Serial ATA Port 0 Empty
Software Preserve Unknown
Serial ATA Port 1 Empty
Software Preserve Unknown
Serial ATA Port 2 Empty
Software Preserve Unknown
Serial ATA Port 3 Empty
Software Preserve Unknown
Serial ATA Port 4 Empty
Software Preserve Unknown
Serial ATA Port 5 Empty
Software Preserve Unknown
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
SATA Controller(s)
Enables or disables SATA device.
SATA Mode Selection
Configures the SATA as IDE or AHCI mode.
IDE This option configures the Serial ATA drives as Parallel ATA
physical storage device.
AHCI This option configures the Serial ATA drives to use AHCI
(Advanced Host Controller Interface). AHCI allows the storage
driver to enable the advanced Serial ATA features which will
increase storage performance.
Copyright © 2014 NEXCOM International Co., Ltd. All Rights Reserved.
Intel
This section is used to configure Intel Rapid Start Technology.
Determines how SATA
controller(s) operate.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Intel Rapid Start Technology

Enables or disables Intel Rapid Start Technology. When enabled, the system
can wake from hibernation within a few seconds.
34
Rapid Start Technology
®
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
Intel(R) Rapid Start Technology [Disabled]
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Enable or disable Intel(R)
Rapid Start Technology.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NEX 885 User Manual