Security - Nexcom NEX 885 User Manual

Chapter 3: BIOS Setup

Security

Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Chipset Boot
Password Description
If ONLY the Administrator's password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User's password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
The password length must be
in the following range:
Minimum length 3
Maximum length 20
Administrator Password
User Password
Secure Boot menu
►
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Administrator Password
Select this to reconfigure the administrator's password.
User Password
Select this to reconfigure the user's password.
Copyright © 2014 NEXCOM International Co., Ltd. All Rights Reserved.
Security Save & Exit
Set Administrator Password
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Secure Boot Menu
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Chipset
Platform Mode Setup
Secure Boot Disabled
Secure Boot Control [Enabled]
Secure Boot Mode [Standard]
Image Execution Policy
►
Key Management
►
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Secure Boot Control
Enables or disables secure boot flow control. Secure boot can be enabled
only when:
1. Platform Key(PK) is enrolled and Platform is operating in User mode.
2. CSM function is disabled in Setup.
Secure Boot Mode
Configures the secure boot mode to enable configuration of execution
policy and key management.
52
Boot Security Save & Exit
Secure Boot flow control.
Secure Boot can be enabled only
when 1.Platform Key(PK) is
enrolled and Platform is operat-
ing in User mode and 2.CSM
function is disabled in Setup
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NEX 885 User Manual