Nexcom NEX 885 User Manual page 61

Chapter 3: BIOS Setup
Internal Graphics
Keep IGD enabled based on the setup options.
Aperture Size
Select the Aperture size.
DVMT Pre-Allocated
Select DVMT 5.0 pre-allocated (fixed) graphics memory size used by the
internal graphics device.
DVMT Total Gfx Mem
Select DVMT 5.0 Total Graphic Memory size used by the Internal Graphics
Device.
Primary IGFX Boot Display
Select the video device which will be activated during POST. Has no effect
if external graphics is present. Secondary boot display selection will appear
based on your selection. VGA modes will be supported only on primary
display.
Copyright © 2014 NEXCOM International Co., Ltd. All Rights Reserved.
NB PCIe Configuration
This section is used to configure Northbridge PCI Express settings.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Chipset
NB PCIe Configuration
PEG0
PEG0 - Gen X
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
PEG0 – Gen X
Configure PEG0 B0:D1:F0 Gen1-Gen3
47
Configure PEG0 B0:D1:F0
Gen1-Gen3
Not Present
[Auto]
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NEX 885 User Manual