Nexcom NEX 885 User Manual page 17

Chapter 1: Product Introduction
▪ One 2x 4/2.54mm pin header for: Mic-in/Line-out
▪ Front Panel I/O: HDD LED (1-3 pin); Power LED (2-4 pin)
▪ Reset (5-7 pin); Power Button (6-8 pin)
▪ Onboard pin header for IrDA Tx/Rx (optional)
▪ On-chip RTC with back-up battery/CR2032 holder onboard
System Monitor
▪ Derived from Super IO ITE IT8785E to support System Monitor
▪ Monitoring of voltages, 2 temperatures and 3 Fans Speed
4 Voltage for 3.3V, 5V, 12V, Vcore
2 Temperatures (CPU, one external Temperature Sensor)
3 Fans speed
▪ Watchdog timeout can be programmed by software from 1 second to
255 seconds/minutes
Power Input
▪ Support AT/ATX mode
Standard ATX 24-pin connector for +12V/+5V/+3.3V/+5Vsb/-12V ATX
8-pin connector for +12V power connector
Dimensions
▪ Micro-ATX/Dimension: Lx W, 244mm x 244mm; 9.6"x 9.6"
Environment
▪ Board level operating temperatures: -15°C to 60°C
▪ Storage temperature: -20°C to 85°C
▪ Relative humidity: Operating 10% to 90%, (non-condensing)
Certifications
▪ Meet CE
▪ FCC Class A
Copyright © 2014 NEXCOM International Co., Ltd. All Rights Reserved.
3
NEX 885 User Manual