Quick Connection To Internet; Insert Sim Card; Antenna Installation; Power Supply - Advantech EKI-1334 User Manual

Signal Status LED Description
----- Signal: 1-9 (poor signal level, router cannot work, please check the
antenna and local signal level)
------ Signal: 10-19 (Router can work under this signal level)
------ Signal: 20-31 (Perfect signal level)
2.3

Quick Connection to Internet

2.3.1

Insert SIM Card

Open EKI-1334 SIM/UIM card case at the bottom, insert the SIM card and close the
case.
2.3.2

Antenna Installation

After install the EKI-1334, connect the interface of enhanced antenna to the interface
of skin antenna and screw tightly. Put the amplifier of enhanced antenna to where it
can receive the signal well.
Caution! Position and angle of the antenna may influence the quality of signal.
2.3.3

Power Supply

Connect EKI-1334 to power supply with the power supply cord in the package,
observe whether the Power LED on the panel of EKI-1334 goes on. If not, please
contact Advantech for technical support.
You can start to configure EKI-1334 after the Power LED turns on.
2.3.4

Connect

Link EKI-1334 with PC:
1. Using a cable to link EKI-1334 with a PC;
2. After the connection, you can see one LED of RJ45 Interface turns green and
the other flashes.
9 EKI-1334 User Manual