Table of Contents
Advertisement
This page is to configure the OpenVPN settings, including Tunnel Name, Work Mode,
Protocol, Port No. and other items.
Name
Tunnel name
Enable
Mode
Protocol
Port
OPEN VPN Server
Authencation Type
Pre-shared Key
Remote Subnet, Remote Net
mask
Link Detection Interval, Link
Detection Timeout
Renegotiate Interval
EKI-1334 User Manual
Description
default
Enable this configuration
Client or Server
UDP or TCP
Import or Export Certificate (CRL)
OPEN VPN Server's IP or DNS
1.
None ----- for host to host connection (not available
when 700 as server)
2.
Pre-shared Key ----- for host to host connection (not
available when 700 as server)
3.
User/Password ----- For multi users to access
CA needed: Client: root CA (ca.crt)
Server: root CA (ca.crt), public key (pub.crt),
private key (pri.key)
4.
X.509 Cert (multi-client) ----- CA mode for multi users to
access
CA needed: Client: root CA (ca.crt), public key
(pub.crt), private key (pri.key)
Server: root CA (ca.crt), public key (pub.crt),
private key (pri.key)
5.
X.509 Cert -----CA mode for host to host tunnel
CA needed: Client: root CA (ca.crt), public key
(pub.crt), private key (pri.key)
Server: root CA (ca.crt), public key (pub.crt),
private key (pri.key)
6.
User+X.509 mode------username + password + CA cer-
tificate
CA needed: Client: root CA (ca.crt), public key
(pub.crt), private key (pri.key)
Server: root CA (ca.crt), public key (pub.crt),
private key (pri.key)
Set shared key or TLS-AUTH static password
Set the static route of the router, always towards the subnet
of its peer
Always use default
Always use default
50
Advertisement
Table of Contents
