Introduction - Advantech EKI-1334 User Manual

1.1

Introduction

EKI-1334 are M2M wireless routers that integrate 3G network and virtual private
network (VPN) technologies. The products meet fundamental needs of field
communication in industry, support international commercial UMTS (HSPA+) and
GPRS network.
The design of the EKI-1334 fully incorporated the requirements of industrial users,
adopted multi-level software detection mechanism. Multiple VPN protocol ensures
security in data transmission, preventing malicious access and tampering of data.
The humanized WEB configuration interface is easy for customer to use. It also
supports connection to multiple network devices, enabling multi service processing.
The EKI-1334 are the ideal choice for industrial usage, having low power
consumption, wide working temperature range from -20° C to 70° C, small size and
light weight that is easy for application in harsh, narrow industrial environment.
Important Safety Information
This product is not intended for use in the following circumstances

Area(s) where radio transmission equipment (such as cell phone) are not per-
mitted.

Hospitals, health care facilities and area(s) where cell phones are restricted by
law.

Gas stations, fuel storage and places where chemical are stored.

Chemical plants or places with potential explosion hazard.

Any metal surface that may weaken the radio signal level.
RF safety distance

For GPRS router, the compliance boundary distance is r=0.26 m for GSM 900
MHz and r=0.13 m for DCS 1800 MHz.

For HSUPA router, the compliance boundary distance is r=0.26 m for GSM 900
MHz and r=0.13 m for DCS 1800 MHz, r=.0.094 for WCDMA 900 MHz, r=0.063
for WCDMA 2100 MHz.
Warning
This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
WEEE Notice
The Directive on Waste Electrical and Electronic Equipment (WEEE), which entered
into force as European law on 13th February 2003, resulted in a major change in the
treatment of electrical equipment at end-of-life.
The purpose of this Directive is, as a first priority, the prevention of WEEE, and in
addition, to promote the reuse, recycling and other forms of recovery of such wastes
so as to reduce disposal.
The WEEE logo (shown at the left) on the product or on its box indicates that this
product must not be disposed of or dumped with your other household waste. You
are liable to dispose of all your electronic or electrical waste equipment by relocating
over to the specified collection point for recycling of such hazardous waste. Isolated
collection and proper recovery of your electronic and electrical waste equipment at
the time of disposal will allow us to help conserving natural resources. Moreover,
EKI-1334 User Manual 2