Vpn - Advantech EKI-1334 User Manual

3.1.7

VPN

This page introduces the parameters in EKI-1334 Web.
1. IPSec Settings
To build an IPSec VPN Tunnel, you need to first set IPSec properties on this page,
then go to IPSec Tunnels to add your VPN:
IPSec Settings
Description:
1. Select to Enable or Disable NATT, normally we need to enable, unless you ensure
there is no NAT routers in the network.
2. Select to enable Compression Mode or Debug
Name
Enable NAT Transversal
(NATT)
Keep alive time interval of
NATT
Enable Compression
Enable Debug
Force NATT
2. IPSec Tunnels
EKI-1334 User Manual
Description
Click to enable NATT
Set live time for NATT
Click to enable
Click to enable
Click to enable
44
Default
Enable
60 sec
Enable
Disable
Disable