Interacoustics Titan IMP440 Setup & Installation page 46

4. The Titan and you PC are now connected via Bluetooth. Click Close.
5. To confirm the Bluetooth pairing, Start up the Titan Suite from Otoaccess, Noah or in Standalone
mode (see the Operation Manaul for further instructions). Ensure that the Titan is still switched on.
6. Allow the Bluetooth device to search for the Titan. After a short while, your Titan with a
corresponding identification number will appear in the window below.
7. Click on "Titan xxxxxx" and wait a few seconds to allow it to connect.
8. On connection, the Suite will finish launching and the Titan HHU screen will show "PC-controlled"
Now the Titan can be operated from PC in the same way as if it was connected via a USB cable.
Titan Setup and Installation Manual Page 42