To install the printer connection you switch on the Titan and press Protocol | My Titan | Printer | Search.
When the search is completed, select the serial number and/or type of printer and press Select.
Note that most HP printers, according to their manuals, allow direct printing through a USB connection.
Connecting the Titan directly through USB will NOT allow you to print.
Note that the HP printers allow the use of a pin code for the use of Bluetooth. Titan will NOT be able to print
to your printer if this function is used.
More detailed information regarding hand held use of the Titan can be found in the Operation Manual
specific to the module you are licensed for.
2.2.1.8
Installing Titan and its Battery
Titan
The battery compartment is opened by gently pressing the
indentation and sliding the cover downwards.
Place the battery inside the compartment. Make sure the battery
contacts line up with the contacts inside the Titan.
Replace the cover on the Titan and push it upwards to close the
battery compartment.
If not in operation for long periods, it is recommended to remove the
battery from the Titan.
Setup and Installation Manual
Page 13