Table of Contents
Advertisement
2.2.7
Placing the Montage-Indication Stickers on the PreAmplifier
A sheet containing Montage-Indication stickers has been enclosed to provide assistance to the user for
correct placement of the electrodes and cables. Each sheet contains two stickers; the top one showing the
mastoid montage setup and the bottom one showing the nape montage setup.
Ensure that that the safety icon is not covered during sticker placement.
2.3
Cleaning the Probe Tip
In order to secure correct impedance measurements it is important to make sure that the probe system is
kept clean at all times. Therefore please follow the below illustrated instructions on how to remove e.g.
cerumen from the small acoustic and air pressure channels of probe tip.
Titan
Remove the required sticker from the sheet and attach to the back
of the PreAmplifier.
Never clean the probe tip while the tip is still fitted on the
probe.
Unscrew the probe cap of the probe by turning in the counter
clockwise direction.
Remove the probe tip from the probe.
Setup and Installation Manual
Page 29
Hide quick links:
Advertisement
Table of Contents
