Connecting Transducers To The Shoulder Box And Preamp - Interacoustics Titan IMP440 Setup & Installation

2.2.1.12

Connecting transducers to the shoulder box and PreAmp

You can only perform contralateral stimulation during impedance reflex measurements when the shoulder
box or PreAmp is connected to the Titan.
1
Titan
When using the shoulder box (for IMP/OAE), plug the jack of
the contralateral headphone, insert phone or CIR55 into the
shoulder box where it is labeled "Phones Contra".
When using the PreAmp, all transducers (contra headphones,
TDH39, Insert EarTone 3A etc), except for the probe, are
connected via the Omnetics port (1) beside the probe
connection plate (2).
2
Setup and Installation Manual Page 16