2.2.1.2
Mounting a Cradle on the wall
In order to mount the cradle to the wall you will need the following tools: a drill and a screwdriver.
You may need to find out which plugs and screws are best to use depending on the material of the
wall.
Titan
Use the retaining plate of the cradle and a pencil to draw the
exact position of the 3 screw holes on the wall. Make sure that
the height is chosen in a way that you can still read the Titan
display when it is placed in its cradle.
Drill the holes and insert the plugs provided. Use three screws
to mount the retaining plate to the wall.
Put the power cable, printer cable and USB cable behind the
retaining plate. Attach these to the cradle before sliding the
cradle onto the retaining plate.
Now the spare battery and Titan can be placed in the cradle.
Setup and Installation Manual
Page 10