Received Call Log - Icom IC-M506 Instruction Manual

7
DSC OPERATION
D Receiving a Test Acknowledgement Call
When a Test Acknowledgement Call is received:
The alarm sounds for 2 minutes.
➥
"Received ACK" is displayed. The backlight blinks for 2
➥
minutes.
q Push [ALARM OFF] to stop
the alarm and the blinking
backlight.
• Even if you do not push [ALARM
OFF], the alarm stops after 2
minutes, and then the screen in
step w is displayed.
w Push [EXIT] to return to the
normal operating mode.
• The transceiver exits the DSC
mode.
• " " continues to blink and the
Call is stored in the Received
Call Log.
65

Received Call log

■
The transceiver automatically stores up to 50 distress mes-
sages and 50 other messages, and they can be used as a
supplement to your logbook.
• While in the normal operating mode, the "
per right corner of the LCD when there is an unread DSC message.
D Distress message
Push the softkey [LOG] to enter "RCVD CALL LOG" in the
q
DSC CALLS menu, or you can enter it through the Menu
screen.
➪
MENU DSC
(Push [MENU]) (Select icon)
Y]/[Z] to select "Distress," then push [ENT].
Push [
w
• The Distress messages are stored in "Distress."
• The " " icon appears when there are unread DSC messages.
• The " " icon appears when there are no unread DSC mes-
sages.
• No icon appears when there are no DSC messages.
• Push [BACK] to return to the previous screen.
• Push [EXIT] to return to the normal operating mode.
" icon blinks in the up-
Received Call Log
➪
(Rotate dial, then push [ENT].)