Connecting A Usb Device - Siemens F IWLAN Operating Instructions Manual

Mounting and connection
4.5 Connecting the HMI device
4.5.9

Connecting a USB device

You can connect the following devices to the USB port of the HMI device:
● External mouse
● External keyboard
● USB memory stick
Only connect industrial devices.
Note when connecting
NOTICE
USB interface only suitable for commissioning
Use the USB interface for commissioning and maintenance only.
The cable length of the connected USB devices may not exceed 3 meters.
IP65 protection with a USB device not guaranteed
If a USB device is connected to one of the USB ports, the HMI device does not comply with
the IP65 degree of protection.
Do not connect a USB device if dust or moisture can enter the device.
Devices with a separate power supply
Self-powered devices cause a malfunctions in the HMI device. A PC or configuration PC is
an exception.
Only connect a configuration PC or PC to the USB port.
Malfunction
A USB device that places too much power consumption load on the USB port can damage
the HMI device.
Be aware of the maximum power load placed on the USB port.
Access to USB port
The USB port is disabled while the main rechargeable battery is being replaced. You
cannot save data to a USB memory stick, for example, while the main rechargeable battery
is being replaced.
Ensure no one tries to access the USB port while the main rechargeable battery is being
replaced.
Note
Devices without a separate power supply connected to the USB port increase the power
load. This will reduce the service life of the HMI device.
See also
Specifications (Page 244)
80
PRELIMINARY II
Wireless Teach Pendant F IWLAN V2
Operating Instructions, 08/2010, A5E02453837-01
1.7.2010