Siemens F IWLAN Operating Instructions Manual page 96

Operator controls and displays
5.6 Holding, operating and setting down the HMI device
NOTICE
Holding the HMI device
If you do not carry the HMI device with the neck strap and hold it as shown, you cannot
operate the EMERGENCY STOP button or enabling button quickly enough in a dangerous
situation.
Carry and hold the HMI device as shown. This especially applies to all hazardous
movements that you control manually. You can then engage the EMERGENCY STOP
button or enabling button as fast as possible in a dangerous situation.
Setting down the HMI device
A docking station is available for safe and stationary storage of the HMI device.
NOTICE
Pressing the EMERGENCY STOP button
If the HMI device is placed in an unsuitable holder, the operability of the EMERGENCY
STOP button will be impaired.
Therefore, only use the docking station especially designed for storing the
Wireless Teach Pendant F IWLAN.
The HMI device can be used as a stationary device when it is placed in the docking station.
The following figure shows how the HMI device is placed in the docking station.
96
PRELIMINARY II
Wireless Teach Pendant F IWLAN V2
Operating Instructions, 08/2010, A5E02453837-01
1.7.2010