Mounting and connection
4.5 Connecting the HMI device
4.5.3
Ports and reset button
The following figure shows the interfaces and reset button of the HMI device.
①
②
③
④
⑤
⑥
⑦
Note
The RJ45 interface is only suitable for commissioning.
If you want to use the RJ45 port, the connection compartment must be open. The IP65
degree of protection is no longer met for the Wireless Teach Pendant F IWLAN when the
connection compartment is open.
Do not open the connection compartment if dust or water could enter the device.
All unsaved data will be lost when you press the reset button. Press the reset button only
when the HMI device is no longer working properly and no longer responds to input.
68
USB port with cover
Rechargeable buffer battery
Memory card slot
Plug and socket for the rechargeable buffer battery
Reset button
Contact for the power supply
RJ45 socket for LAN
PRELIMINARY II
Wireless Teach Pendant F IWLAN V2
Operating Instructions, 08/2010, A5E02453837-01
1.7.2010