Siemens F IWLAN Operating Instructions Manual page 70

Mounting and connection
4.5 Connecting the HMI device
Procedure – using a memory card for the first time
Note
The first time you use a memory card, the HMI device will prompt you to format it. All data is
lost on the memory card during formatting.
Back up existing data, if necessary, before you use the memory card in the HMI device.
Proceed as follows:
1. Cancel the formatting procedure by pressing "ESC".
2. Remove the memory card from the slot.
3. Back up data that are still needed.
4. Insert the memory card into the slot.
5. Format the memory card.
Procedure – removing a memory card
Proceed as follows:
1. Pull the memory card out of the slot.
2. Store the memory card in a safe place.
3. Close the connection compartment.
70
PRELIMINARY II
Wireless Teach Pendant F IWLAN V2
Operating Instructions, 08/2010, A5E02453837-01
1.7.2010