Connecting The Base Station; To Pabx; Dialling Modes And Recall; Saving An Access Code (Outside Line Code) - Siemens Gigaset C470 Manual

Connecting the base station to PABX

Connecting the base station

to PABX

The following settings are only necessary
when your PABX requires them; see the
PABX user guide.
You cannot send or receive SMS messages
on PABXs that do not support Calling Line
Identification.

Dialling modes and recall

The current setting is indicated by
Changing the dialling mode
The following dialling modes can be
selected:
u
Touch tone dialling (DTMF)
u
Dial pulsing (DP)
¢ ¢ ¢
v Ð
Base
¢
Dialling Mode
s
Select dialling mode (
and press
a
Press and hold (idle status).
Setting recall
Your phone is preset at the factory for
operation on the main connection. For
operation on a PABX, you may have to
change this value. Please refer to the user
guide for your PABX.
¢ ¢ ¢
v Ð
Base
¢
Recall
s
Select recall and press
‰
( = set value). Possible val-
ues are:
80 ms, 100 ms, 120 ms,
180 ms, 250 ms, 300 ms,
600 ms, 800 ms.
a
Press and hold (idle status).
52
‰
.
Add. Features
‰
= on)
.
§OK§
Add. Features
§OK§
Saving an access code
(outside line code)
Precondition: You may have to enter an
access code for external calls in your PABX,
e.g. "0".
¢ ¢ ¢
v Ð
Base
¢
Access Code
~
Enter or change access code,
max. 3 digits.
¤
Save changes: (page 59).
If an access code has been saved:
u
The access code is prefixed automati-
cally when you select from the follow-
ing lists: numbers of the SMS centres,
call history or answer machine list.
u
The access code must be entered when
dialling manually and when manually
entering directory, emergency/quick
dial numbers and SMS centre numbers.
u
If you copy the recipient's number from
the directory when sending an SMS,
you have to delete the access code.
u
An existing access code is deleted
using X.
Add. Features