Operator Controls And Displays; Overview - Siemens F IWLAN Operating Instructions Manual

Operator controls and displays

5.1

Overview

The standard input unit on the HMI device is the touch screen. All operator controls required
for operation appear in one or more HMI screens on the display after the project starts.
NOTICE
Damage to the touch screen
Never touch the touch screen with a pointed or sharp object. Avoid applying sudden
pressure to the touch screen with a hard object. Both these will substantially reduce the
service life of the touch screen and can even lead to total failure.
Always operate the touch screen of the HMI device with your fingers or with a touch pen.
Membrane keyboard
The following figure shows the membrane keyboard of the
Wireless Teach Pendant F IWLAN.
①
②
③
Wireless Teach Pendant F IWLAN V2
Operating Instructions, 08/2010, A5E02453837-01
Membrane keyboard – six buttons simultaneously enabled
Membrane keyboard for robot control
Key "ON/OFF"
PRELIMINARY II
1.7.2010
5
83