3.2 Operating Conditions - Siemens F IWLAN Operating Instructions Manual

Planning the use

3.2 Operating conditions

3.2 Operating conditions
Mechanical and climatic ambient conditions
The HMI device is designed for use in a location protected from the effects of the weather.
The ambient conditions meet the requirements for DIN IEC 60721-3-3:
● Mechanical requirements according to class 3M3
The following table applies to the HMI device and docking station.
● Climatic requirements according to class 3K3
Use with additional protective measures
You may only use the HMI device at the following locations with additional protective
measures:
● In locations with a high degree of ionizing radiation
● In locations with difficult operating conditions, for example due to:
– Corrosive vapors, gases, oils or chemicals
– Electrical or magnetic fields of high intensity
● In systems that require special monitoring, for example:
– Elevators
– Systems in especially hazardous rooms
Damping shock and vibration
If the HMI device is subjected to impermissibly strong shocks or vibrations, you must take
appropriate measures to reduce amplitudes or acceleration. In such situations, use vibration
damping or vibration absorber systems for the HMI device and accessories.
NOTICE
Setting down the HMI device
If you place the HMI device on a surface with a high natural frequency, malfunctions may
occur as a result.
Do not place the HMI device on a surface with a high natural frequency.
48
PRELIMINARY II
Wireless Teach Pendant F IWLAN V2
Operating Instructions, 08/2010, A5E02453837-01
1.7.2010