Advertisement
Table of Contents
2 0 0 5 - 2 0 0 6 Vi c t o r y H a m m e r
Parts List
1
Power Commander
1
USB Cable
1
CD-ROM
1
Installation Guide
1
Power Adapter
2
Power Commander Decals
2
Dynojet Decals
2
Velcro
Strip
®
1
Alcohol Swab
The ignition MUST be turned
OFF before installation!
You can also download the Power
Commander software and latest maps
from our web site at:
www.powercommander.com
PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION
Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89081 (800) 992-4993 www.powercommander.com
i921-411
www.powercommander.com
I n s ta l l a t i o n I n s t r u c t i o n s
Button Adjustment Display
Faceplate Buttons
Expansion Port
USB Port
2005-2006 Victory Hammer - PCIII USB - 1
Advertisement
Table of Contents
Related Manuals for Dynojet Power Commander III USB
Summary of Contents for Dynojet Power Commander III USB
- Page 1 Commander software and latest maps from our web site at: www.powercommander.com PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89081 (800) 992-4993 www.powercommander.com i921-411 www.powercommander.com 2005-2006 Victory Hammer - PCIII USB - 1...
- Page 2 Remove the left hand side cover. Remove these bolts Remove the battery. Remove the three bolts that hold the battery tray to frame and pull the battery tray out (Fig. A). Unplug the stock wiring harness from the ECU, which is attached Unplug this connector to the back of the battery tray (Fig.
- Page 3 Plug the connectors from the Power Commander in-line of the Stock connector ECU and stock wiring harness (Fig. D). PCIII connectors Reinstall the battery tray and T op view of install battery. Reinstall the side cover. Make sure all wires will not get pinched or damaged.
Need help?
Do you have a question about the Power Commander III USB and is the answer not in the manual?
Questions and answers