Specifications - Philips HF3431 User Manual

ENGLISH
20
2 Switch on the appliance and leave it on until it goes out
automatically.
3 To open the housing, place the tip of a flat-head screwdriver on the
break line. The break line is indicated on the back of the housing.
Hit the top of the screwdriver handle with a hammer until the
screwdriver penetrates the housing breaks. Repeat this in several
spots along the break line (Fig. 17).
4 Continue with the final part of the break line which is located
between the rubber feet and the housing. Once all segments of the
break line are loose, you can open the housing with the tip of the
screwdriver. The rechargeable battery is now visible (Fig. 18).
5 Remove the rechargeable battery from the housing with the tip of
the screwdriver (Fig. 19).
Note: Do not try to remove the rechargeable battery with your fingers.
The plastic edges of the housing may be sharp.
You have now successfully removed the rechargeable battery from
,
the appliance.

Specifications

Model
Electrical
Rated input voltage adapter
Rated input frequency adapter
No-load power adapter
Rated output voltage adapter
Rated output power adapter
Standby power appliance
HF3431
100-240 Vac
50/60 Hz
<0.1 W
9 Vdc
10 W
<0.25 W