Specifications - Philips PR3120 Manual

English
14
Problem
The device makes a ticking
sound after disconnecting
the device from the wall
socket.
The device switches off
before the preset
treatment time has
elapsed and sometimes it
automatically switches on
again.

Specifications

Model
Rated voltage (V) and rated frequency (Hz)
Rated consumed power/output power
Medical device classification
Insulation class
Ingress of water
IR type
Irradiance at 30 cm from the filter
Service life
Mode of operation
Net weight
External dimensions
Infrared light
Tested according to
Wavelength
Max output
Possible cause
The lamp is defective.
The mains cord is damaged.
The timer is not in the off
position.
The cooling vents are blocked
and the device becomes too
hot.
The fan is defective and the
device becomes too hot.
Solution
Contact the Philips Consumer Care
Center.
If the mains cord is damaged, you
must have it replaced by Philips, a
service center authorized by Philips
or similarly qualified persons in order
to avoid a hazard.
Turn the timer to the off position.
Make sure the cooling vents are not
covered or blocked.
Contact the Philips Consumer Care
Center.
PR3120
220-240 V ~50-60 Hz
300 W
IIa
Class II
IP21
A/B/C
2
approx. 1000 W/m
5 years
Continuous
Approximately 2 kg
180x206x316 mm (LxWxH)
IEC 60601-2-57:2011
700-3000 nm
2
1.2 kW/m