Specifications - Philips PR3120 User Manual

English
14
Problem
The device makes a ticking
sound after disconnecting
the device from the wall
socket.
The device switches off
before the preset
treatment time has
elapsed and sometimes it
automatically switches on
again.

Specifications

Model
Rated voltage (V) and rated frequency (Hz)
Rated voltage (V) Taiwan
Rated power input (W)
Medical device classification
Insulation class
Ingress of water
IR type
Irradiance (W/m²)
Expected service life
Mode of operation
Net weight
External dimensions
Irradiance
Possible cause
There is a power failure.
The lamp is defective.
The mains cord is damaged.
The timer is not in the off
position.
The cooling vents are blocked
and the device becomes too
hot.
The fan is defective and the
device becomes too hot.
Solution
Connect another device to check if
the power supply works.
Contact the Philips Consumer Care
Center.
If the mains cord is damaged, you
must have it replaced by Philips, a
service center authorized by Philips
or similarly qualified persons in order
to avoid a hazard.
Turn the timer to the off position.
Make sure the cooling vents are not
covered or blocked.
Contact the Philips Consumer Care
Center.
PR3120
220-240 V ~50-60 Hz
110 V
300 W
IIa
Class2
IP21
A/B/C
approx. 1000 W/m²
5 years
Continuous
Approximately 2 kg
180x206x316 mm (LxWxH)
1235803 mW/m-2