Warranty And Support; Recycling; Technical Specifications - Philips Lumea SC1994 Manual

26
English
Problem
The results of the treatment
are not satisfactory.

Warranty and support

Recycling

Technical specifications

Adapter
Adapter input
Adapter output
Average active
efficiency
Efficiency at low load
(10 %)
No-load power
consumption
Possible cause
You have used a light intensity
setting which is too low for
you.
You did not flash an area
adjacent to an area you treated
before.
The device is not effective on
your body hair color.
You do not use the device as
often as recommended.
You respond more slowly to IPL
treatment.
If you need information or support, please visit www.philips.com/support or
read the international warranty leaflet.
-
This symbol means that this product shall not be disposed of with normal
household waste (2012/19/EU).
-
Follow your country's rules for the separate collection of electrical and
electronic products. Correct disposal helps prevent negative consequences for
the environment and human health.
100–240 V ~ 50/60 Hz 1.0 A
24.0 V 1.5 A 36.0 W
≥87.4 %
≥80.87 %
<0.1 W
Solution
Select a higher setting next time.
You have to release the flashes close to
each other and there should be some
overlap between the flashes.
If you have light blond, grey, red or white
hair, the treatment is not effective.
To remove all hairs successfully, we advise
you to follow the recommended treatment
schedule. You can reduce the time
between treatments, but do not treat more
often than once every two weeks.
Continue using the device for at least
6 months, as hair regrowth can still
decrease over the course of this period.