Specifications - Philips BlueTouch PRP6100/02 Manual

Problem
The adapter becomes
warm during charging.
The charging light
does not go on
when the small
plug is inserted into
the socket on the
connection panel.
The charging light
does not go on when
I connect the micro
USB cable.
The BlueTouch Pain
Relief Patch becomes
warm during use.
Model
Rated voltage (V)
Rated frequency (Hz)
Rated input (W)
Class
Classification
Ingress of water
Max. daily dose (J/cm²)
Battery type
Possible cause
The skin temperature is
too high.
This is normal.
The adapter is not inserted
or not inserted properly
into the wall socket.
The wall socket is not live.
The micro USB plug is not
inserted into the micro
USB socket properly or
is not connected to the
computer or USB charger
properly.
This is normal.

Specifications

Solution
Check if you do not wear too many or too thick
clothes over the BlueTouch Pain Relief Patch
during treatment.
No action required.
Insert the small plug into the socket for the small
plug on the connection panel and insert the
adapter into a wall socket.
Connect another appliance to the same socket
to check if the socket is live. If the wall socket is
live, but the BlueTouch Pain Relief Patch does not
charge, contact Philips.
Insert the micro USB plug into the micro USB
socket properly and check the connection to
the computer or the charger. Make sure the
computer or charger is switched on.
No action required.
PRP6100/02
100-240
50-60
15
Medical device Class IIa
Risk Group 1
IP22
< 90 if treatment schedule is followed
Li-Ion
english
45