Polycom RealPresence Group 300 User Manual page 20

User's Guide for the Polycom RealPresence Group Series
16
To adjust a Polycom EagleEye HD, Polycom EagleEye II, Polycom EagleEye
Acoustic, Polycom EagleEye 1080, Polycom EagleEye View, Polycom
EagleEye Director or Polycom EagleEye III using the remote control:
1 Select either a near-end or far-end video source to control. During a
multipoint call being hosted by a system in the call, you can only adjust a
camera at the far end that has a current speaker.
If you are using an EagleEye Director and camera tracking is on, you must turn
camera tracking off before adjusting the camera.
2 Press the navigation buttons on the remote control to move the camera
up, down, left, or right.
3 On the remote control, press
To adjust a Polycom EagleEye View camera:
1 Manually swivel the camera right, left, up, or down to frame the view.
2 Turn the focus wheel to adjust the focus.
3 To select the camera, select
for near-end control or Their Cameras for far-end control.
to zoom out or to zoom in.
> Cameras. Then select Your Cameras
Polycom, Inc.