Polycom RealPresence Group 300 User Manual page 36

User's Guide for the Polycom RealPresence Group Series
32
To answer a call using a connected SoundStation IP 7000 conference phone:
>> Press the Answer soft key on the conference phone.
To place a point-to-point call using a connected SoundStation IP 7000
conference phone:
1 Press on the conference phone and press the Video or Phone soft
key.
2 On the conference phone keypad, enter one of these:
— The IP address (for example, 10*11*12*13) of the site you want to call
— The phone number (for example, 19784444321) of the site you want to
call
— To enter letters, press the ABC soft key. To enter an asterisk, press the
Video button and then press
keypad two times.
— To enter a dot or @ symbol, press the ABC soft key then
multiple times.
You can also place calls using the conference phone's directory or the redial
key.
The indicators on the conference phone are green when the system is in a call
and audio is not muted.
To place a multipoint call using a connected SoundStation IP 7000
conference phone:
1 Call the first site.
2 When the call connects, press the Add Video or Add Phone soft key on
the conference phone.
3 Place a call to the next site.
4 Repeat steps 2 and 3 until all sites are connected.
To control volume in a call using a connected SoundStation IP 7000
conference phone:
>> Press and
audio from the far end.
You can also adjust the volume using the volume buttons on the RealPresence
Group system remote control.
on the SoundStation IP 7000
on the conference phone to adjust the volume of
Polycom, Inc.