Polycom RealPresence Group 300 User Manual page 28

User's Guide for the Polycom RealPresence Group Series
24
Connections for a RealPresence Group 700 System
To start showing content from a source connected to a RealPresence Group
System:
>> Using your remote control, select
from the list.
While in a call, you can select
off the last used content source.
Points to note about showing content:
• Audio from the content input is muted unless the content input is selected as
a video source.
• If both digital and analog inputs are connected, only the digital content is
sent. To send analog content, disconnect both digital and analog inputs, wait
15 seconds, then connect only the analog input.
To stop showing content:
>> Using your remote control, select
content source, such as Hide Laptop.
and then select your content source
> Select on your remote to turn on and
> Hide and the name of your
Polycom, Inc.