Polycom RealPresence Group 300 User Manual page 10

User's Guide for the Polycom RealPresence Group Series
6
3 Wait until the status light on the battery turns green before removing it
from the port.
Recharging the battery might take from 20 minutes to multiple hours.
Insert the charged battery into the remote control.
4
The following figure illustrates these steps for RealPresence Group 300, 500
and 700 systems.
If you have a RealPresence Group 700 system, you can also recharge the
battery using the USB port on the front of the system.
The following figure illustrates these steps for RealPresence Group 550:
Polycom, Inc.