Getting Started; What's In The Box; How To Install - Tunstall Universal Sensor Installation Manual

2. Getting Started

What's in the box?

1No. Universal Sensor
2No. Door Contacts
4No. Door Contact screws
2No. Velcro Pads
1No. RJ11 Cable

How to install

The Universal Sensor should be installed in a clean, dry environment and for
optimum radio performance should be mounted away from metallic surfaces.
The Universal Sensor can be fastened to the wall etc. by a variety of methods –
integral keyhole slots, sticky pads, Velcro etc. The installer should determine the
most appropriate method.
When installed using a Door Contact it is important to
line the top screw hole with the bottom of the
Universal Sensor screen; this ensures that the built-in
reed switch and magnetic contact are correctly
aligned.
6