Pendant
After
unlocking
the Universal Sensor and entering
using the "Up Button" and or "Down Button"
Suggested Configuration: this can be changed using
Contact Type
Input
Cable Connection
The Universal Sensor can now be connected to a 3
used as a pendant and the
test call before leaving the property.
When "Pendant" is highlighted press the "Select Button"
The Universal Sensor will confirm it is now configured to be used
rd
with a 3
party device as a Pendant.
NO
Channel 2
3.5mm Jack
Tunstall Home
"Select Mode"
"Advanced
rd
party device which is going to be
unit. Tunstall recommends completing a
navigate the menu
Mode".
30