Smoke Detector - Tunstall Universal Sensor Installation Manual

Smoke Detector

After unlocking the Universal Sensor and entering
using the "Up Button" and or "Down Button"
Suggested Configuration: this can be changed using
Contact Type
Input
Cable Connection
The Universal Sensor can now be connected to a Smoke Detector with a normally
closed relay (sold separately) and to the
completing a test call before leaving the property.
When "Smoke Detector" is highlighted press the "Select Button"
The Universal Sensor will confirm it is now configured to be used
rd
with a 3 party device as a Smoke Detector Sensor.
NC
Channel 1
RJ11
"Select Mode"
"Advanced
Tunstall Home unit. Tunstall recommends
navigate the menu
Mode".
35