Virtual Bed - Tunstall Universal Sensor Installation Manual

Virtual Bed

After unlocking the Universal Sensor and entering
using the "Up Button" and or "Down Button"
Suggested Configuration: this can be changed using
Contact Type
Input
Cable Connection
The Universal Sensor can now be connected to a Bed/ Chair Pad (sold separately) and
the Tunstall Lifeline or Telecare System. Tunstall recommends completing a test call
before leaving the property.
When "Virtual Bed" is highlighted press the "Select Button"
The Universal Sensor will confirm it is now configured as a Virtual
Bed Sensor.
NO
Channel 1
RJ11
"Select Mode" navigate the menu
"Advanced Mode".
25