Alb - Auto Low Battery; Ap - Auto Presence; Status - Battery - Tunstall Universal Sensor Installation Manual

ALB – Auto Low Battery
AP – Auto Presence
Status – Battery
Using the "Status" menu it is possible to check the status of the internal battery. The
battery will either report "Normal" or "Low". When "Low" is displayed the battery
should be replaced and at this stage the Universal Sensor will have sent an ALB alarm
to the monitoring centre.
When the battery is low the Universal Sensor will automatically
notify the monitoring service. When a battery is low it is
recommended that the battery is replaced within 2 weeks.
Auto Presence provides additional checks that the Universal
Sensor is functioning. When activated the Universal Sensor sends
a signal to the home unit every 4 hours. If the Universal Sensor is
then taken out of the property or has its battery removed, these
signals will not be received, and the Tunstall Home Unit will raise
an alert at the monitoring centre if configured to do so. If the
Universal sensor is used in AP mode, the device will need to be
deleted from the system if it is removed from the property,
otherwise alarms will be raised.
20