Configuration Menu - Tunstall Universal Sensor Installation Manual

Configuration Menu

The "Configuration Menu" is accessed after
contains a list of the options used to set up the Universal Sensor.
Select Mode:
Advanced Mode:
Battery:
Language:
Send Message:
Setup Summary:
About:
Exit:
unlocking the Universal Senor
Used to select which
predefined sensor type the
Universal Sensor should
operate as.
Changes can be made here to
the Input type (RJ11 or
3.5mm) and the contact
channel (Normally Open or
Normally Closed).
Used to configure AP and ALB
and displays the status of the
user changeable battery.
Displays a list of selectable
display languages which the
Universal Sensor can operate
in.
Sends a test radio message
from the Universal Sensor.
This will raise an alarm on the
Tunstall device. Exits back to
the Configuration Menu.
Displays the current
configuration of the Universal
Senor.
Displays the current installed
firmware.
Exits the Configuration Menu
and puts the Universal Sensor
into its configured mode.
and
10