Epilepsy Sensor - Tunstall Universal Sensor Installation Manual

Epilepsy Sensor

After unlocking the Universal Sensor and entering
using the "Up Button" and or "Down Button"
Suggested Configuration: this can be changed using
Contact Type
Input
Cable Connection
The Universal Sensor can now be connected to a 3
used as a Epilepsy Sensor and the
completing a test call before leaving the property.
The Universal Sensor has a specific interface to ensure compatibility with Abilia
Epilepsy Control Units (and their associated sensing pads). It is therefore only
compatible with this item (number D-1090).
When "Epilepsy" is highlighted press the "Select Button"
The Universal Sensor will confirm it is now configured to be used
rd
with a 3 part device as an Epilepsy Sensor.
NO
Channel 1
Specialised 3
Tunstall Home
"Select Mode"
"Advanced
rd
party cable into the RJ11
rd
party device which is going to be
unit. Tunstall recommends
navigate the menu
Mode".
31