Enuresis Sensor - Tunstall Universal Sensor Installation Manual

Enuresis Sensor

After unlocking the Universal Sensor and entering
using the "Up Button" and or "Down Button"
Suggested Configuration: this can be changed using
Contact Type
Input
Cable Connection
The Universal Sensor can now be connected to a 3
used as an Enuresis Sensor and the
completing a test call before leaving the property.
When "Enuresis" is highlighted press the "Select Button"
The Universal Sensor will confirm it is now configured to be used
rd
with a 3 party device as an Enuresis Sensor.
NC
Channel 1
RJ11
Tunstall Home
"Select Mode" navigate the menu
"Advanced Mode".
rd
party device which is going to be
unit. Tunstall recommends
28