Features And Introduction; Your Universal Sensor - Tunstall Universal Sensor Installation Manual

1. Features and Introduction

Your Universal Sensor

The Universal Sensor works as an interface between wired electrical devices and
Tunstall telecare enabled systems. These may include an existing intruder alarm
system, natural gas detector, carbon monoxide detector or pressure mat.
Programmed using the built-in buttons and LCD screen the Universal Sensor is easily
set to send a message to the home unit identifying which type of device it is linked
to. When the attached device is triggered the Universal Sensor sends the appropriate
message, providing the operator at the response centre with sufficient information
to respond accordingly.
The Universal Sensor can also receive inputs from normally open or normally-closed
contacts enabling it to be connected to a wide range of devices.
Responsibility for suitability and relevant standards compliance lies with the Service
Provider.
3