Co Detector - Tunstall Universal Sensor Installation Manual

CO Detector

After unlocking the Universal Sensor and entering
using the "Up Button" and or "Down Button"
Suggested Configuration: this can be changed using
Contact Type
Input
Cable Connection
The Universal Sensor can now be connected to a CO Detector with a normally closed
relay (sold separately) and to the
completing a test call before leaving the property.
When "CO Detector" is highlighted press the "Select Button"
The Universal Sensor will confirm it is now configured to be used
rd
with a 3 party device as a CO Detector.
NC
Channel 1
RJ11
Tunstall Home
"Select Mode" navigate the menu
"Advanced Mode".
unit. Tunstall recommends
32