Door Guard - Tunstall Universal Sensor Installation Manual

Door Guard

After unlocking the Universal Sensor and entering
using the "Up Button" and or "Down Button"
Suggested Configuration: this can be changed using
Contact Type
Input
Cable Connection
Monitoring Deactivated
The Universal Sensor can now be used with the magnetic contacts (included in the
box) and the Tunstall Home
leaving the property.
When "Door Guard" is highlighted press the "Select Button"
The Universal Sensor will confirm it is now configured as a Virtual
Bed Sensor.
NC
Channel 1
Using the included magnetic contact and RJ11
Monitoring can be disabled for 60 mins
unit. Tunstall recommends completing a test call before
"Select Mode" navigate the menu
"Advanced Mode".
33