Changing Gear In Cruise Control System Mode; Driving Downhill With The Cruise Control System (Ccs); Automatic Switch-Off - Volkswagen Tiguan Owner's Manual

Bedienungsanleitung < Service & Zubehör < Volkswagen Deutschland
http://www.vw-manual.co.uk/browse?7&token=deniol2172xjKhhhjJ3Pby9gS&lang=en-GB&doc=5NA012720AB&link=3&preventShowIndivisualManualMessage=true[27/10/2016 22:58:22]
wheel.
OR: briefly press the
Switching off the CCS
steering wheel.
control temporarily.
Press the
wheel.
Resuming CCS control.
Press the
wheel briefly to increase the speed in small increments
of 1 km/h (1 mph) and to store the speed.
Press the
wheel briefly to increase the speed in increments of 10
Increasing the set speed
km/h (5 mph) and to store the speed.
(during CCS control).
Press and hold the
steering wheel to increase the speed continuously until
the button is released, and to store this speed.
Press the
wheel briefly to reduce the speed in small increments of
1 km/h (1 mph) and to store the speed.
Press the
wheel briefly to reduce the stored speed in increments of
Decreasing the set speed
10 km/h (5 mph) and to store the speed.
(during CCS control).
Press and hold the
steering wheel to decrease the speed continuously until
the button is released, and to store this speed.
The system will decrease the speed until the new set speed is reached by easing off the acceleration without a
braking intervention.
With active regulation, briefly press the
the multifunction steering wheel twice .
Switch off the cruise
OR: in any operating mode, press the
control system (CCS).
the multifunction steering wheel and hold for an
extended period .
The mph figures given in brackets in the table relate exclusively to instrument clusters with mile readings.

Changing gear in cruise control system mode

The cruise control system reduces acceleration as soon as the clutch is depressed, and automatically continues to regulate the speed after a
gear change.

Driving downhill with the cruise control system (CCS)

If the cruise control system cannot maintain the vehicle speed when driving downhill, brake the vehicle with the foot brake and shift down gear if
necessary.

Automatic switch-off

The cruise control system control will be switched off automatically or switched off temporarily:
If the system detects a fault that could impair the function of the cruise control system.
If the vehicle speed is higher than the stored speed for an extended period with the accelerator pedal depressed.
If regulation related to the driving dynamics is taking place, e.g. by the traction control system and ESC.
If the brake pedal is depressed.
button in the multifunction
OR: depress the brake pedal.
Control is switched off temporarily. The speed is stored in the memory.
button on the multifunction steering
The stored speed is reactivated and controlled.
button on the multifunction steering
button on the multifunction steering
button on the multifunction
The vehicle accelerates actively until it reaches the new set speed.
button on the multifunction steering
button on the multifunction steering
button on the multifunction
button on
button in
The system is switched off. The stored speed will be deleted.
Press the lever ① to position
Move the lever to position ①
Tap the lever to position ①
increase the set speed in small increments of 1 km/h
(1 mph) and to store the speed.
Press the pressure point
increase the set speed in increments of 10 km/h (5 mph)
and to store the speed.
Press and hold the
⊕ button to increase
the set speed continuously. The new speed setting will
be stored when you release the button.
Tap the button ③ repeatedly to decrease the set
speed in small increments of 1 km/h (1 mph) and to
store the speed.
㊀ briefly to
Press the pressure point
decrease the set speed in increments of 10 km/h
(5 mph) and to store the speed.
Press and hold the pressure point
decrease the set speed continuously. The new speed
setting will be stored when you release the button.
Move the lever to position ① .
.
.
repeatedly to
⊕ briefly to
㊀ to