Opening The Performance Monitor; Selecting Instruments And Setting Units; Adapting The Display Areas To The Driving Situation - Volkswagen Tiguan Owner's Manual

Bedienungsanleitung < Service & Zubehör < Volkswagen Deutschland
http://www.vw-manual.co.uk/browse?7&token=deniol2172xjKhhhjJ3Pby9gS&lang=en-GB&doc=5NA012720AB&link=3&preventShowIndivisualManualMessage=true[27/10/2016 22:58:22]
Arrow buttons for changing to the lap timer.

Opening the performance monitor

Press the button on the Infotainment system.
Touch the Selection function button.
Touch the Sport function button.
MENU
OR: press the button on the Infotainment system.
Touch the Vehicle function button.
Touch the Selection function button.
Touch the Sport function button.
CAR
OR: press the button on the Infotainment system repeatedly until the performance monitor is displayed.
If you would like to switch between the performance monitor and the lap timer
above the instruments → Fig. 61 ②.

Selecting instruments and setting units

The display can show a maximum of three instruments at the same time. Each instrument can be selected for each display area
(left, middle, right).
To change instruments, swipe vertically over the display. The currently selected instrument will then disappear and a new instrument will appear.
The units can be set for some instruments in the Infotainment system
The following instruments can be displayed:
Charge pressure display: the charge pressure display
turbocharger and engine (in the unit bar). The further to the right the needle on the scale, the higher the engine power output.
Accelerometer (G-meter): The accelerometer (G-meter)
red marking in the grid-type area shows the acceleration level and the direction of the acting force (in the opposite direction according to
physical laws). If you drive to the left, for example, the red marking will move in the right area of the instrument (and vice versa). If you
accelerate, the red marking will move down. If you brake, the red marking will move up. The level of acceleration is indicated by the position
of the red marking which moves outwards. If the acceleration increases, the red marking will move away from the centre area.
→ Fig. 61
Power display: the power display
(in kW).
Coolant temperature display: The needle may move further in clockwise direction under high engine loads and with high outside
temperatures. This is no cause for concern unless the
and coolant temperature display .
Oil temperature display: the needle is in the middle area under normal driving conditions. If the needle is in the bottom left area, this means
that the engine has not yet reached its operating temperature. Avoid excessively high speeds and acceleration when the engine has not yet
reached its operating temperature. The needle may move further in clockwise direction under high engine loads and with high outside
temperatures. This is no cause for concern unless the
oil .

Adapting the display areas to the driving situation

Choose the three possible instruments corresponding to your individual driving style and the driving situation.
WARNING
→ Lap timer
→ Operation and display in the infotainment system
→ Fig. 61
① (left) shows the pressure in the charge air system between the
→ Fig. 61 ① (centre) shows the acceleration value in the centre (in the unit g). The
① (right) shows the current engine power output as a digital value and on the surrounding scale
indicator lamp in the instrument cluster display is lit up or flashing
indicator lamp in the instrument cluster display is lit up or flashing
, touch one of the arrow buttons on the left and right
→ Fig. 61
.
→ Warning lamp
①
→ Engine