Personalisation; Welcome And User Account Selection; User Management And Setup - Volkswagen Tiguan Owner's Manual

Bedienungsanleitung < Service & Zubehör < Volkswagen Deutschland
http://www.vw-manual.co.uk/browse?7&token=deniol2172xjKhhhjJ3Pby9gS&lang=en-GB&doc=5NA012720AB&link=3&preventShowIndivisualManualMessage=true[27/10/2016 22:58:22]
Cancel current lap
During a running time measurement, touch the function button to pause measurement
measurement is cancelled and the lap time is deleted. --: --:--.-- is displayed in the statistics.
Touch the function button for the intermediate time
Display intermediate time
for a few seconds and the intermediate time is displayed.
After ending or cancelling time measurement, touch the function button for the statistics
The statistics show the number of laps, the overall time, the fastest and slowest laps, the average value of all
Display statistics
lap times and all lap values.
Touch the
Touch the function button for statistics
Reset data in the statistics
button.
A maximum of 99 laps and a maximum time of 99 hours, 59 minutes and 59 seconds can be recorded. If one of these limits has been reached,
the data in the statistics must be deleted before a further time measurement.
WARNING
Avoid operating the lap timer when the vehicle is in motion if possible.
Preset lap timer settings and access statistics only when the vehicle is stationary.
When the vehicle is in motion, use the lap timer only in driving situations which are easy to control.

Personalisation

First read and observe the introductory information and safety warnings
The personalisation function allows you to save your individual vehicle settings (e.g. settings for air conditioning system, instrument cluster or
light) in a user account. You have four user accounts available. Users are identified using the vehicle key upon unlocking the vehicle. One user
account is assigned to each vehicle key.
Changes to the setup will be assigned to the active user account and saved upon locking the vehicle or changing the user account.

Welcome and user account selection

When personalisation is activated, the name of the current user account appears on the instrument cluster display for approximately 10 seconds
after you switch on the ignition.
During this time, you can select a user account using the buttons on the wiper lever or multifunction steering wheel
When you select a user account, the saved vehicle settings are activated.

User management and setup

When the ignition is switched on you can use the Personalisation menu in the infotainment system for user management and setup. Please
proceed as follows to access the menu:
Press the infotainment button.
Press the function button and touch Personalisation.
If the checkbox in the function button is ticked
Menu Submenu
Personalisation Active
Driver 1
Driver 2
Driver 3
Driver selection
Driver Guest
function button to go back to the previous menu.
→ Fig. 63
⑩. Delete the data by touching the Reset function
→ Introduction
, the respective function is switched on.
Settings
Switch personalisation on and off
– Select a user account.
– Rename user account (except for user account Guest).
– Copy settings of the active user account to another user account.
– Reset the saved settings of the selected user account to factory
settings. The user name will not be changed and it will still be
assigned to the same vehicle key
⑦. Time
→ Fig. 63 ⑨. The stopwatch → Fig. 62
→ Fig. 63
→ Instrument cluster
① stops
⑩
.