Multi-Access - Ricoh IS 2245 Settings Manual

Multi-Access

You can carry out another job using a different function while the current job is
being performed. Performing multiple functions simultaneously like this is
called "Multi-accessing".
This allows you to handle jobs efficiently, regardless of how the machine is being
used. For example:
• While making copies, you can scan documents to store in the Document Serv-
er.
• While printing documents stored in the Document Server, the machine can
receive print data.
• You can make copies while receiving fax data.
• While printing print data, you can make operations for copying.
Note
❒ See p.52 "Print Priority" for setting function priority. As default, [Display
Mode] is set to first priority.
❒ When the optional 1000-sheet finisher, 2 Tray finisher or booklet finisher is in-
stalled on the machine, you can specify the output tray where documents are
delivered. For details about how to specify the output tray for each function,
see the following descriptions:
• p.53 "Output: Copier (copier)"
• p.53 "Output: Document Server (Document Server)"
• p.53 "Output: Facsimile (facsimile)"
• p.54 "Output: Printer (printer)"
-Function compatibility
The chart shows function compatibility when print priority is set to "Interleave".
See p.52 "Print Priority".
|: Simultaneous operations are possible.
$: Operation is enabled when the relevant function key is pressed and remote
switching (of the scanner) is done.
❍: Operation is enabled when the {Interrupt} key is pressed to interrupt the pre-
ceding operation.
→: Operation is performed automatically once the preceding operation ends.
×: The operation must be started once the preceding operation ends. (Simultane-
ous operations are not possible.)
Multi-Access
2
29