Cannot Send Data - Konica Minolta bizhub PRO 1100 Quick Manual

6.4

Cannot Send Data

If you cannot send data, [Error] is displayed in [Send History] on the [JOB LIST] screen.
Check the free space on the HDD (image controller area).
A
Start the Web browser.
B
Enter the IP address of the image controller in the address bar, and then press [Enter].
The user mode screen of PageScope Web Connection is displayed.
For details, refer to the HTML User's Guide.
C
Click [Device Information], and then click [Option].
D
Check [Remain] in [HDD (Pre-
RIP/Form/Scan Data)].
- To delete unnecessary scan data, use an
HDD TWAIN driver. For details, refer to the
user's guide for the HDD TWAIN driver.
- Automatically delete scan data that are
stored in the HDD (image controller area)
after the specified time period has elapsed.
The [MACHINE] screen - [Controller] - [Scan
Setting] - [Auto Delete Document]. For
details, refer to the HTML User's Guide.
For information about the default
administrator password, refer to page 6-15.
-
Lower the data resolution.
Note that the image quality may be
degraded. For details, refer to the HTML
User's Guide.
- Reduce the number of pages.
Divide the originals, or remove pages
unnecessary to scan.
bizhub PRO 1100
6
6-13