Cannot Send Data - Konica Minolta AccurioPress 6136 Quick Manual

Hide thumbs Also See for AccurioPress 6136:
Table of Contents

Advertisement

4.4

Cannot Send Data

If you cannot send data, [Error] is displayed in [Send History] on the [JOB LIST] screen.
Check the free space on the HDD (image controller area).
A
Start the Web browser.
B
Enter the IP address of the image controller in the address bar, and then press [Enter].
AccurioPro Print Manager starts and the registration dialog is displayed.
C
Input a user name into the registration dialog.
You can input up to 64 characters for the user name.
D
In the AccurioPro Print Manager screen, click [Configuration] - [PageScope Web
Connection].
The user mode screen of PageScope Web Connection is displayed.
For details, refer to the HTML User's Guide.
E
Click [Device Information], and then click [Option].
F
Check [Remain] in [HDD (Pre-
RIP/Form/Scan Data)].
-
To delete unnecessary scan data, use an
HDD TWAIN driver. For details, refer to the
user's guide for the HDD TWAIN driver.
-
Automatically delete scan data that are
stored in the HDD (image controller area)
after the specified time period has elapsed.
For details, refer to the HTML User's Guide.
For information about the default
administrator password, refer to the [Safety
Information].
-
Lower the data resolution.
Note that the image quality may be
degraded. For details, refer to the HTML
User's Guide.
-
Reduce the number of pages.
Divide the originals, or remove pages
unnecessary to scan.
AccurioPress 6136/6136P/6120
4
4-13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Accuriopress 6136pAccuriopress 6120

Table of Contents